Tools and Techniques for Bonsai

Here is Tools and techniques for bonsai trees;

Scissors - It is a good idea to have at least two pairs of scissors. A long pair with fine tips will be useful for trimming small branches while a heavier pair with thicker blades and larger handles will be useful for trimming roots. Having separate tools for these two areas will help to prevent the spread of any disease.

Concave Branch Cutters - Available in several different sizes, the cutting head is curved so that when cutting branches a slightly hollowed out wound is produced. This shaped cut is ideally shaped to heal with a good chance of minimum scarring. Straight edged tools would leave the wound flat and resultant healing would produce a slight bump. They are widely used for general ranch cutting work but ar only suitable for removing small branches flush to the trunk.They are designed to be used from the side of the cut and are sometimes referred to as side cutters.

Knob cutters - Available in several different sizes they are similar to the concave cutters but go one step further and produces a spherical cut. They are designed to be used end on to a cut and get their name from their main use removing knobs or stubs of branches flush to the trunk. They are also useful for nibbling away chunks of wood prior to carving.

Wire cutters - Cutters with very strong tips are needed for removing wire from trees with the minimum of damage. Conventional wire cutters can be used in most cases but they must be a quality pair that would cost as much as custom made Japanese cutters anyway.

Jin Pliers - are designed with flat blades that are used for removing bark from jins. A cut is made through the bark around the base of the jin using a knife or branch cutters and then the jin pliers are used to squash the bark which seperates it from the wood beneath. The jin pliers can then be used to crush the end of the jin and grasp fibres that when stripped away will give a natural looking finish

Root Cutters - At repotting it is sometimes necessary, particularly with yamadori stock, to reduce large roots. Root cutters are designed like knob cutters but with flat blades and a much thicker blade that will stand up to the added wear and tear experienced in amongst the root ball

Trunk Splitters - An advanced tool used to split trunks or thick branches to allow bending or for seperating deadwood from a branch.

Root Hooks - A simple enough tool for combing out the root ball but one that will make repotting that much easier

Rakes, Tweezers, Spatulas - Mostly available in double ended combinations they are useful for a multitude of maintainance tasks.

Sieves - To get the best out of your potting Medium it should be sieved into its various sizes. Different grades can be used in a single pot with large particles on the bottom or if you have trees on different scales then different grades can be matched to the size of the tree.
Sieve sets come with 3 different sized interchangeable meshes to cater for all sizes.

Scoops - can be improvised but our Stainless steel Japanese set of 3 includes a mesh back in the largest which is invaluable for removing dust from top dressing material

Bending Jacks - Again can be improvised in more traditional ways but these small clamps have their uses

Turntables - A simple plastic turntable is invaluable for working on trees making it that much easier to move around the tree. Also useful under trees that require turnng on display benches to allow light to all areas.

Folding saw - For the removal of thick branches a quality saw is invaluable. A folding saw has the advantage that it can be carried easily when out collecting.